SMART MULTIPLE DIP SMD 35
Temperature Sensor for the measurement
of molten metal temperature.
Designed for multiple dips in slag free molten
metal where only the quartz tube is immersed.
It consists of a Pt/Pt-Rh thermocouple in an extra
long quartz protection tube, cemented in a plastic
housing and fitted in paper tube with a special
high temperature connector assuring complete contact
even after a number of dips.
This sensor can be used for 5-6 times
Depending on the intervals between successive
immersions and the metal temperature, the number
of measurements may vary.
Available in standard IPTS 68 and IPTS 90 calibrations
with different Thermocouple types:
No sputtering and spilling
Ideal for induction furnace and ladles
Paper Tube length 300mm
More number of readings per thermocouple tip results
Decreased 'burn-out' problems of contact block/
Increased operator protection
Measuring time: 3 to 12 seconds
Maximum immersion time : 8 seconds at 1650°C
Contact block - Mini / Mark VII
For Ferrous /Non Ferrous metal
Temperature Range : 500 to 1750 °C
Type "S" - Pt v/s Pt 10% Rh
Type "R" - Pt v/s Pt 13% Rh
For Nonferrous metal
Temperature Range : 300 to 1250 °C
Type "K" Chromel Alumel